Archive for the ‘Work it Out Wednesday’ Category

WOW #30: Glimmer Mist

I have been scrapooking for years now, but one thing that helps keep it interesting is the fun new techniques and products that I get to play with. I like to get messy, create things, and feel a sense of accomplishment once my projects are complete. One product in particular gives me that wonderfully satisfied feeling and that is Glimmer Mist.

Tattered Angels generously donated two colors to complete today’s project: Lemon Zest and Golden Terracotta.

To complete today’s project you will need: Glimmer Mist in the colors of your choice, the pattern paper or cardstock you choose to use, a protective surface for your project (I use newspaper or a plastic tablecloth from the dollar store), and some sort of a mask. The mask can be a plastic template or “screen,” a vinyl die cut, a chipboard shape–really whatever you’d like to use as a mask will work well (including household items like keys or hands, etc.)–just know that whatever you use will need to be cleaned immediately afterwards.

Step 1: On a covered surface, place your cardstock/paper down and spray the Lemon Zest (or lighter color) across the cardstock. (Keep spray a few inches away–and test a scrap piece until you feel comfortable with the spray nozzle.)

Mist-1

Step 2: Place mask on cardstock.

Mist-2

Step 3: Use the Golden Terracotta (darker color) to spray across and around the mask.

Mist-3

NOTE: Before continuing with project, allow the sprayed area to dry.

Here is my completed project:

Mist Final

(Supplies: Cardstock–Provo Craft, American Crafts, Die Cuts with a View, Bazzill; Transparency–Little Yellow Bicycle; Pattern Paper–Bo Bunny; Scallop scissors–Provo Craft; Circle punches–EK Success; Pearls–Hero Arts; Stamps–Stampin’ Up, Technique Tuesday, American Crafts, Hero Arts; Stamping ink–Inque Boutique, Versamark, Stampin’ Up; Photo corners–Heidi Swapp; chipboard butterfly–Scenic Route; Font–Vintage Typewriter; Glimmer Mist–Tattered Angels)

For more information and tutorials on Glimmer Mist, be sure to visit the Tattered Angels Demo page. I found their tutorials VERY helpful. You can also check out their beautiful selection of mists while there.

Here is an example of the Screens offered by Tattered Angels:

Trees

And here is a photo of their Limited Editions colors for 2010:

Spring-2010_editted

Note: If I mentioned that Heidi Swapp is collaborating with Tattered Angels would that make you EVEN more excited? Be sure to check out exclusive products created with Heidi in mind!

Do you have a completed card or scrapbook layout to show fellow readers? We’d love to see how Glimmer Mist has made an impact on your projects! Just leave a link in the comments section below!

Jen Gallacher

WOW #29: Recoloring a Digital Element

Are you the type that’s never satisfied with using something just one way? Do you like to make your dollar stretch? I’m right there with you!

Digital scrapbooking can be an inexpensive alternative to traditional scrapbooking when you know a few tips and tricks. Today I’m going to share with you a few methods for recoloring a digital element.

For this project, you will need: a digital element downloaded from your favorite digital site, a photo editing program (I’m using Photoshop CS4).

Step 1: Open up your photo editing program and open up your digital element. (Keep the element small enough on your screen so that you can open additional dialog boxes to complete this technique.)

Ali-Edwards-word-change-1

Read the rest of this entry »

Jen Gallacher

WOW #28: Button Tying (some options)

I’m slightly addicted to using buttons on my projects. Growing up my mother had a wonderful jar full of lovely buttons that I would scoop up and sift through my fingers. I loved their unique textures, sizes, and colors. That button jar just made me happy!

For today’s “Work It Out Wednesday” I’m going to show you a couple of different ways you can add a button to your project.

For today’s project you will need the following objects:

Supply-photo

Read the rest of this entry »

Jen Gallacher

WOW #27: Masking a Stamp

The great thing about creating a stamped image is the ability to customize it! One way to do that is to “mask” part of the image. Masking refers to covering part of a stamped image with a mask so that you can add a a new stamped image above it without destroying the first image.

For this project you will need: ink pads, stamps, scratch paper, final project paper, scissors, and temporary adhesive.

Stamp-1

Read the rest of this entry »

Jen Gallacher

WOW #26:Extract a Digital Element from a Digital Template

In a previous “Work It Out Wednesday,” I showed you how to use a digital template by dropping in your favorite photos, embellishments, and papers. Today I’d like to show you how to use your digital templates in a new way–to extract a digital element to use on another project.

For this process you will need your photo editing program (I’m using Adobe Photoshop CS4), and a digital template.

Step 1: Open up the digital template in your photo editing program.

Extract Digital Element 1

Step 2: Open a new document (in this case, I’m creating a new 12X12″ layout). For today’s procedure I’m just going to drag the digital element onto a blank document.

 Extract Digital Element 3

Extract Digital Element 4

Step 3: Return to the original document (the template) and locate the item you’d like to extract. (I chose a beautiful floral brush.) NOTE: Each element, photo frames, text, embellishments, and papers are on a separate layer and by selecting the particular layer you want to reuse, you can drag it and drop it into your new document.

Extract Digital Element 2

Step 4: Drag the layer you’ve selected onto your new document.

Extract Digital Element 5

(Supplies: “Scrap Canvas 9″ by the Queen of Quirk for www.twopeasinabucket.com)

What’s so great about this process is that digital designers create beautiful elements to use on their templates, and since I’m fairly new to this whole digital process I’d like to use their creations more than once. By dragging elements from a digital template onto my next project, I get the same professional-grade look on my new project. (Be sure to always credit the designer, the website, and the digital kit used when posting your projects online–they worked hard on their designs and they certainly deserve the credit!)

Be sure to save the original template with the layers intact (you don’t want to lose great elements on your templates).

Do you have a digital scrapbooking process you’d like to learn more about? Please leave a comment in the comments section below and your question may appear in an upcoming WOW!

Jen Gallacher

WOW #25: Using Rub-ons on Acrylic

I love learning from my expert friends. I could so get used to this! I hope you’re enjoying meeting some of my scrapbooking friends and learning from their expertise. This week I’ve asked Shannon Tidwell to share her scrapbooking skills with us. Shannon serves as a designer for KI Memories, and man, can she rock their products! So I knew she was the right one to ask when it came to teaching about rub-ons.

Here are her instructions:

“I’ve prepared a fun layout using KI Memories Good Tidings Glitter Rub-ons.  They have the nicest shimmer and go on like butter. I applied them to acrylic tags by Tim Holtz to show how easily they can be used on a hard surface.

IMG_7455

IMG_7457

IMG_7459

IMG_7460

Here is Shannon’s completed layout:

 Final-project

(Supplies: KI Memories Good Tidings Glitter Rub-ons, KI Memories Chunky Red Glitter Stickers, Tim Holtz Charm Fragments Pack, Tim Holtz Tiny Attacher, Martha Stewart Ornaments Edger Punch, Red string, White cardstock, Kraft cardstock, Glue Dots, Pop Dots)

To create this layout I first adhered the white cardstock to the kraft background.  Then I adhered the photos across the seam using pop dots for a bit of dimension. After the tags were ready I threaded them on the red string and attached the string to the background on the ends.  To help the tags stay in place I put glue dots behind them.  To finish up the layout I used a couple more KI Good Tidings Glitter Rub-Ons for the title as well as KI Chunky Red Glitter Stickers.  I still felt like the layout needed something so I punched a strip of white cardstock using the Martha Stewart Ornaments Edger Punch and attached it to the very top of the layout. (These photos were part of our Christmas card shoot. I will add the journaling on the backside.   I think I will write about the chaos involved in trying to get three kids to look at the camera!)”

I love how Shannon precuts her rub-ons before adding them to the project! This keeps rub-ons that you’re not using from sticking to the project. I like to keep my paper backing stapled to my leftover rub-ons when I store them (another way to keep rub-ons intact).

Do you have a rub-on tip for me? I’d love to hear it! Just leave a comment in our comments section!

Jen Gallacher

WOW #24: Using the Silhouette Machine to add Rhinestones to a Project!

This week’s expert is Kerri Bradford with a project using the Silhouette Machine. Silhouette has recently released a wonderful new product: The Rhinestone Starter Kit. This awesome kit uses the Silhouette Machine to create templates using the downloadable designs they’ve created to add rhinestones to your layouts or any project. I received one, and my daughter and I are dying to play with it!

I asked Kerri to give us step-by-step instructions on how to use this fabulous kit:

480F

4810

4811

4812

4813

(Note: You could also cover holes with tape to change colors, sizes and such.)

4814

4815

4816

(Note: If you are setting rhinestones on fabric, you would set it for 90 seconds on one side, turn it inside out, and set it for 90 seconds again.)

4817

Here is the final sample using The Rhinestone Starter Kit on a layout:

4818

4819

But don’t stop there!! This awesome kit can be used to alter fabric projects as well. Check out these fabulous ideas:

481B

481C

(Supplies: Downloadable Designs – Princess with Wand image, Fleur de Lis image, Flourish image, Beautiful Word image, and Lace circle image all from Silhouette.)

Some fun things to note about Silhouette. They have recently starting adding images from other exciting companies like The House of 3 and Hero Arts. Now you can find your favorite designs in one great location!

If you have any questions or comments about these fun projects, you are welcome to leave a comment in the comments section. We love hearing from you!

Jen Gallacher

WOW #23: Creating a Drop Shadow for a Digital Elements!

There are some things that are just better left to the experts, and sometimes there are digital techniques that I think could be better explained by someone “in the know.” So for this week’s “Work It Out Wednesday” I’ve asked Jen Martakis a digital scrapbooker and digital designer to show us how to create a drop shadow for digital elements.

For this project you will need a photo editing program (Jen used Adobe Photoshop CS4), digital papers, a digital template and your photo.

Here are her instructions:

SS1

I want to add shadows to the brackets in this layout. I don’t want anything too dramatic, just a bit of realistic dimension. To do this we will add a custom drop shadow to the layers.

 

You will need your layer palette open. First, you’re going to target the element that you want to create the shadow for. For our example this will be the left bracket. Once the element is targeted, you will need to right click on the highlighted layer in your layer palette. This will bring up a list of options. Click on “Blending Options”.

SS2

This brings up your “Layer Style” box. You will leave all these setting as they are and click on the “Drop Shadow” option.

Read the rest of this entry »

Jen Gallacher

WOW #22: Using Gamsol to Color Stamped Images

Once again, I’ve asked an industry expert to share some design tips with us. Today I’ve asked Nichol Magourik to share an exciting technique I read on her blog: using Gamsol to color stamped images.

For this project, you will need: Butterflies Remountable Rubber Cling Stamps by Hero Arts, Black Memories Dye Ink Pad by Hero Arts, Colored Pencils by Prismacolor, and Gamsol (for blending colored pencils).

Step 1: Color in tips of butterfly wings using Dahlia Purple Prismacolor pencil.

6a00d8341c6f8a53ef012875beaec9970c-800wi

Step 2: Color in the inside of each wing section and small dots using Aquamarine Prismacolor Colored Pencil.

6a00d8341c6f8a53ef0120a6bcee57970b-800wi

Read the rest of this entry »

Jen Gallacher

WOW #20: Stamp Kiss a Design

I’ve said it before, and I mean it! I’m always learning from you. So I thought this month, I would share a few projects that made me say, “WOW!!” And so for today’s “Work It Out Wednesday” Lisa Johnson is going to teach you how to “kiss” a stamp. Sound exciting? It is!!

For this project, you will need a shape stamp (Lisa used a leaf stamp), a background design stamp, and the paper of your choice.

Step 1: Giving a kiss. This smaller leaf stamp, clean, was pressed onto one of the diamond images from Background Basics: Diamonds. The result is that the diamond image is transferred to the leaf.

6a00d8341c585053ef012875ae8a3c970c-800wi

Step 2: This is is another way to do this. This time place the background design on the leaf shaped stamp.

6a00d8341c585053ef0120a6ac30db970b-800wi

Here’s a photo of the two images she inked:

6a00d8341c585053ef012875af052b970c-800wi

And here’s how they look on paper:

6a00d8341c585053ef012875aee393970c-800wi

Gorgeous isn’t it?!! Here’s a completed project using these techniques:

6a00d8341c585053ef012875ae8de5970c-800wi

Lisa’s Blog “Poppy Paperie” is full of lovely stamping projects. You can see more photos of this and other projects by visiting. Supplies are also listed on her blog.

Don’t forget to leave a comment in the comments section to be entered in our “Band Hero” giveaway. And be sure to check the Cards Blog and the Simply Handmade Blog for additional giveaways and ideas!

Jen Gallacher